← All articles

Towing Lights Explained: Reading a Tow at Night

Two or three masthead lights? Diamond or no diamond? Rule 24 decoded so you can read any towing vessel correctly at night.

16 November 2026 · 8 min read · IRPCS crew

A tug pushing a barge through a busy channel at two in the morning is not a situation where you want to be guessing. Yet towing light configurations are among the most frequently misread arrangements at sea - and among the most heavily tested on RYA, MCA, and USCG oral exams. Get the logic clear once and it sticks forever.

Rule 24 of the COLREGS governs all vessels engaged in towing or pushing. It is worth reading carefully alongside the annexes, because the lights it prescribes carry real navigational information: how many vessels are involved, how long the tow is, and therefore how much sea room you need to allow. This article walks through the key elements systematically.

The Masthead Light Count: Two Versus Three

The first thing you notice on a towing vessel at night is a vertical stack of masthead lights forward - more than the single masthead light you would see on most underway power-driven vessels. Rule 24 sets the number based on the length of the tow itself, not the length of the towing vessel.

When the tow - measured from the stern of the towing vessel to the after end of the tow - is 200 metres or less, the towing vessel shows two masthead lights in a vertical line, in addition to her sidelights and sternlight. When that tow exceeds 200 metres, she shows three masthead lights in a vertical line instead. This is the single most important threshold in Rule 24 and the one examiners love most.

Think of it as a simple alarm: three white lights stacked forward means the tow is long. Long means the towed vessel or object may be far astern, possibly in darkness, and the whole assembly may stretch across a significant portion of a narrow channel. Give it space. When you see those three whites, your mind should immediately go to the question: where is the far end of this tow?

It is important to understand what Rule 24 does and does not change about a towing vessel's normal light outfit. The forward masthead lights prescribed by Rule 24 are shown in addition to her sidelights and sternlight. A towing vessel of 50 metres or more in length still carries an after masthead light as required for power-driven vessels of that size - Rule 24 adds the forward towing stack but does not remove the after masthead light. In practice, this means a large tug may show both the Rule 24 forward stack and an after masthead light; the key identifying feature remains the vertical grouping of two or three lights on the forward mast and, crucially, the yellow towing light at the stern.

The Yellow Towing Light

Above the sternlight, a towing vessel shows a yellow light with the same arc of visibility as the sternlight - 135 degrees, centred on the stern. This is the yellow towing light, and it is what distinguishes a towing vessel's stern from that of an ordinary power-driven vessel. The sternlight itself is still present, showing white; the yellow light sits directly above it.

If you are overtaking what looks like an ordinary vessel and you notice a yellow light above the white sternlight, you are overtaking a towing vessel. The tow may be directly ahead of you in the darkness. This is a scenario where the yellow towing light could genuinely save lives - which is precisely why Rule 24 requires it.

For exam purposes, the arc and colour of the yellow towing light are frequently tested. It is not a masthead light, it is not all-round, and it is not placed at the bow. It is a stern-sector light, yellow, directly above the white sternlight.

Shapes by Day: The Diamond

Lights are for night and restricted visibility. By day, Rule 24 requires shapes. A towing vessel and her tow each display specific shapes to convey the same information the lights carry after dark.

When the length of the tow exceeds 200 metres, both the towing vessel and the towed object are required to display a diamond shape where it can best be seen. This is a key point: it is not just the tug that shows the diamond - the vessel or object being towed shows one too. When you see a diamond on a vessel that appears to be moving under its own power, look again: it may be on the end of a long tow, with the tug far ahead and possibly obscured.

When the tow is 200 metres or less, no diamond is required. The absence of a diamond by day, then, tells you something: either there is no tow, or the tow is 200 metres or under. The presence of a diamond tells you definitively that the tow exceeds that threshold.

You can explore the full library of Rule 24 requirements - including pushing and alongside arrangements - in the IRPCS rule library at /#learn, where each rule is broken down with worked examples.

Towed Vessels and Objects: What They Show

The towed vessel or object is not invisible at night. Rule 24 requires a towed vessel to show sidelights and a sternlight. Where the tow exceeds 200 metres, the towed vessel or object must also display a diamond shape where it can best be seen. If the towed object is not a vessel - a dredge pontoon, a crane barge, a disabled floating structure - the same requirement for sidelights and a sternlight applies where practicable, along with the diamond when the tow exceeds 200 metres.

This is one reason the masthead light count matters so much. When you see three masthead lights on a tug ahead of you, you know the tow runs beyond 200 metres. Even if you cannot yet see the lights on the towed vessel, you know to look for them and to stay well clear of the intervening water.

Pushing and Alongside: A Brief Note

Rule 24 also covers vessels being pushed ahead or towed alongside - arrangements that are quite common in harbour and river work. A vessel being pushed ahead and a pushing vessel, when in a composite unit, may show the lights of a single power-driven vessel if they are rigidly connected. When they are not rigidly connected, the pushed vessel shows sidelights forward and the pushing vessel's stern arrangement applies aft. These situations have their own specific light requirements under Rule 24 that are worth reviewing separately, particularly for anyone operating in port approaches or inland waterways.

Putting It Together at Sea

In practice, here is the mental checklist when you encounter a vessel showing multiple masthead lights forward at night:

  1. Count the masthead lights - two means the tow is 200 metres or under, three means it exceeds 200 metres.
  2. Look for the yellow light above the sternlight to confirm she is towing astern.
  3. Estimate where the far end of the tow might be, and plan your passing distance accordingly.
  4. Remember that a towing vessel is not automatically a vessel restricted in her ability to manoeuvre. Under Rule 3(g), RAM status requires that a vessel is severely restricted in her ability to deviate from course - most ordinary tows do not meet that threshold, and a towing vessel will show RAM lights and shapes only if she genuinely qualifies. That said, the practical constraints of a long tow mean her ability to alter course quickly is limited, so give the whole assembly generous sea room.
  5. By day, check for diamonds on both the towing vessel and anything that looks like a barge or pontoon in the same area.

The best way to consolidate this is to test yourself against realistic scenarios. The practice quiz at /#quiz includes multi-light identification questions drawn directly from Rule 24, and working through them is far more effective than re-reading notes.

FAQ

Why does the number of masthead lights depend on tow length rather than vessel size? Because the navigational hazard scales with how far astern the tow extends, not with how big the tug is. A small tug towing 250 metres of pipeline pontoon is vastly more of a constraint on other traffic than a large ship towing a small disabled boat 100 metres behind her. Rule 24 encodes the operationally relevant information.

Can I assume a vessel with two masthead lights forward is definitely a towing vessel? Not automatically - some power-driven vessels of 50 metres or more show two masthead lights as part of their normal underway lights, with the second light carried further aft and higher. The key difference on a towing vessel is that the two or three lights prescribed by Rule 24 are both on the forward mast in a vertical stack. Look for the yellow towing light at the stern to confirm towing operations.

Is the yellow towing light shown when pushing ahead? No. The yellow towing light is specific to towing astern. Vessels pushing ahead or towing alongside show different light arrangements as specified in Rule 24, without a yellow light at the stern.

What if the towed object has no crew and therefore cannot maintain lights reliably? This is a real-world concern and one reason why mariners should never assume that the absence of lights at the far end of a tow means nothing is there. Rule 24 requires the towed object to be lit, but radar, AIS, and proper watchkeeping are your safety net when lighting on the tow is uncertain. Treat the dark water behind a tug with three masthead lights as potentially occupied until you are certain it is clear.

IRPCS articles are a learning aid, not a substitute for formal training or the official publications - always verify against current IMO / USCG editions.

Drill it until it's instinct.

The IRPCS app turns every rule on this blog into adaptive quizzes, drills, and mock exams - free to start.

Get the app →